How to Easily Keep Butcher Block Counters Looking Great
July 17, 2025
Share this
How to easily treat wood butcher block counters so they will resist moisture and last forever!
Contrary to popular belief, wood countertops are not hard to take care of! If you treat them correctly up front, they will last for decades (even around a sink).
Thanks to my Dad I know the best way to treat them and keep them beautiful for years!
I shared how to protect bare wood counters a few years ago, so check out that post to see more detail. I also share how I stained the butcher block in that post.
This time I wanted to show you how well they have held up over the past eight years and share how I retreat them every year or so:
I shared how to protect bare wood counters a few years ago, so check out that post to see more detail. I also share how I stained the butcher block in that post.
This time I wanted to show you how well they have held up over the past eight years and share how I retreat them every year or so:
It's really best to reapply this every six months or so...but as you'll see, it's not absolutely necessary. Ours have held up beautifully even after a year or more.
Overall, the whole island counter has lightened from use, and it was uniform. The only part that was slightly darker was under the tray that I use for hand and dish soap:
This post may contain affiliate links for your convenience.
I may earn a small commission when you make a purchase through links.
See my policies and disclosure page for more information.
Nearly EVERYTHING is easily cleaned off of the wood counters. We've had water condensation sit for hours, water spills, wine, cat vomit 😖 -- all of it. If you treat them well like I'll show you, you won't have any issues keeping them clean.
The only thing that I haven't been able to remove is permanent marker:
The great thing is, you can sand that down and get rid of it.
When I've treated the counters within six to 18 months, the reapplication process is super easy and quick.
Today I did it again after well over two years, so I did a very light sanding of the wood counters, then proceeded with the rest of the steps...
Whether sanding or not, wipe them down well -- I use a damp microfiber cloth:
Polyurethane works too, but I find this is MUCH easier to work with and hides wear much better. It's also more difficult to take off and refinish.
This is the brand I've used for years:
The Minwax brand has since purchased Formby's and their Minwax Tung oil works just as well.
This is the brand I've used for years:
The Minwax brand has since purchased Formby's and their Minwax Tung oil works just as well.
I have also tried true, pure Tung oil and do not like it as much. It takes absolutely forever to dry.
To apply you'll want a glove to protect your hands and a low lint rag. I just pour the oil out and start spreading:
It instantly warms up the wood! 😍
The oil really brings back that deeper, beautiful wood tone:
Rub it in well, then go over it again immediately while your cloth is wet.
You'll want to make sure you get full coverage. This is why I prefer to do this treatment at night -- I use the sheen of the lights to look for spots that I may not have covered well:
Let it sit for a few minutes, then use a clean rag to wipe up an excess. Continue to rub it in until you get a uniform finish:
Another reason I like to apply the oil at night -- we can leave it to fully dry without touching. Usually one recoat is dry in a few hours.
Be sure to check out this post for more information on the process from bare wood. You can also see there how liquids bead up on the surface once dry.
Tung oil is truly the easiest and best way to protect wood countertops:
Even with our sink in the island, we've had zero warping or damage in our walnut wood countertops!
I LOVE this stuff and the warmth and character of wood counters! I've heard from many readers over the years who have been warned off of them by contractors.
Are they completely maintenance free? Nope. But if you protect them well every year or so they will hold up beautifully with minimal effort.
If you have any questions about wood counters please let me know! :)
Never miss a post by signing up to get posts via email.
Love the wood counter top, especially on an island with a primarily white kitchen. Keep your posts coming! They are a good distraction at this CWAZY time.
ReplyDeleteWe have an old and poorly maintained butcher block countertop in the house my husband bought before we married. We are replacing it. Yours is beautiful. What type of wood is yours? Was it treated when you had it installed, or is this all Tung oil? We want our new one to last and look like yours!!
ReplyDeleteOurs is Walnut. :) I stained ours and then added the Tung oil over the top.
DeleteThe counter tops have held up so well! They look so good too! ❤️✨
ReplyDeleteCharmaine Ng | Architecture & Lifestyle Blog
http://charmainenyw.com
I have a mesquite counter for my island (as a Texan I love my mesquite :-) ). I use pure tung oil on mine - when dry it's food safe, and I think it smells better than products with mineral spirits in them (like Formby's). I love the character that wood counters get with use - I don't mind any marks or dings either. And since they're solid wood, they can always be sanded down and made pristine again.
ReplyDeleteWe just had a butcher block counter installed on our island. Our contractor applied 1 coat of Watco oil & finish. It’s caused the wood grain to be more pronounced and feels rough. Do I just sand and apply more coats? The contractor told me “it’s wood. It’s supposed to feel rough.” He won’t do anything else to it. :(
ReplyDeleteNo, your wood shouldn't be rough! It should be super smooth. I would use steel wool to knock down the texture and then try the Tung oil. You may have to sand it down again if a lot of the oil was used.
DeleteGorgeous! We had wood counters at our last house. I loved them! Your whole kitchen is so beautiful. I admire all the finish choices so much.
ReplyDelete(pinned) ;)