Easy DIY Laundry Shelf Over Washer and Dryer
March 23, 2021
Share this
How to build a shelf to hide the washer and dryer components.
The
mud/laundry room changes
continue, and this project is an oldie but goodie. This is the second time
I've added a
DIY shelf unit behind our top loader washer and dryer
-- I love them!
This room is turning out so beautifully, but it has tested me! I've
had problems with almost every DIY project I've worked on in here -- I had
to tear half of this one out and do it again. So many of the items I've
ordered for the room have been delayed, and items that did arrive on time
were wrong or not enough for what I needed.
It's been SO much fun. 😜 I don't think I've ever had this many problems on
a space before. And that's saying a lot considering I've been at this for
nearly 20 years!
Thankfully all of them have been worth it in the end! This washer and dryer
shelf was something I was really missing in here. As a reminder, this is
what we had before:
Not bad at all! But the cabinets were hung at a height that seemed better
suited for front loaders -- there was no room underneath to put a shelf, but
it was difficult to reach over the washer and dryer and access the
cabinets.
**I always get questions about that tray under the washer -- it catches
small leaks. It was cracked so we had to replace it for now.
Part of my big plan for this space was to move those cabinets over to
another wall in here,
with drawer cabinets underneath. I knew as soon as we moved those that it was a great decision!
That created space for the shelf above the washer and dryer -- you can see
how I built this shelf to hide the ugly stuff behind the washer and
dryer
at our old house:
This post may contain affiliate links for
your convenience.
See my policies and disclosure page for more information.
It gave us better access to things we reach for most.
I did this one a little different so I could add some more storage space. I
started by figuring out the middle spot between the two machines. I hung a
piece of scrap wood and drilled it into studs:
This acts as a support for the bottom shelf -- I like to add a little extra
security wherever I can!
Then I placed some supports at the sides as well -- I used these to secure
my vertical boards (nailed into the side of the supports) as I was
building:
(Ignore that white scrap on the right, it was just leaning there.) They were
purely for support at the beginning, but I'm keeping them there so the
vertical pieces won't move around. You can't really see these when you're
done.
By the way, you can also build this elsewhere and then bring it in and
install. I prefer to build it in place so there are no issues with fit and
size.
I suggest cutting away your baseboards so the side supports can go flush
against the wall:
This makes everything more secure and looks more custom! I use
this small oscillating saw
and it works great!
The bottom shelf was next -- I attached it to the long horizontal support
(the first piece I installed) and the side supports. I nailed it with my
nail gun first:
And then secured it from underneath using screws. (I
used a Kreg jig
to make pocket holes underneath.)
You can also screw into the sides to support that shelf. Just be sure to
use a drill bit to make a hole for the screw to go into first -- this will
help prevent the wood from splitting. You'll also want to make sure you
can cover the head of any screws with putty or trim.
The top piece went on last and I mitered the ends so you don't see any
rough edges on the side or top of the shelves:
The whole thing was super secure, except for in the middle of the unit. It
was bowing a bit with heavier items, so I added a support in the middle that
created two sections:
I used common pine for this project -- the cheapest I could find! I was
planning to paint instead of staining.
I knew stain would look great, but I wanted it to
match the counters
we put in here, so I didn't want to mess with trying to find a stain match.
I also wanted to tie in into the mud room bench unit right next to it:
I caulked everything, then gave it a few coats of semi-gloss white paint. I
ended up adding a simple MDF trim to the front to cover the irregular edges
of the wood boards.
It turned out SO great! It's perfect!:
I'll share links to all the items on the shelves below.
I love having everything we need out and easy to access, but also looking
really cute. ;) I lucked out and found
those cute baskets
that fit perfectly on the bottom shelf. I still have more organizing to do,
but I just love it!:
I have BIG plans for that wall -- I cannot wait to get started on that! The
item I need is on backorder but I'm SO excited about it!
Here's where we started:
And where we are now:
Both look great, but the shelf instead of cabinets (we couldn't reach) is
functioning so much better for us! I also love how this unit hides
the ugly stuff behind the washer and dryer.
Stay tuned for the final addition on this wall!
Here are sources for the items pictured:
Runner is from At Home
Glass spray bottle
for stain spray
See more of
our home here.
To shop items in our home,
click here!
Never miss a post by signing up to
get posts via email.
You are my DIY hero!!
ReplyDeleteSo kind, thank you! :)
DeleteI love the drying rack, clearly you have had it for a while. I don't suppose you know where you got it? The whole thing looks absolutely spectacular. I cannot tell you how much I appreciate the fact that while your spaces are amazing aesthetically, function is a top priority for you, because it is for me too! Thank you!
ReplyDeleteThank you so much!! I got that from IKEA, but I'm not sure if they sell it anymore. :(
DeleteHi, in case I missed it somewhere, would you mind sharing the dimensions you used? I have the same set up and washer and dryer. I am more interested in what your depth of the shelves are. This is the exact look i am looking for.
ReplyDeleteThe boards I used were 1x10s, which are actually 9 and 1/4 inches. The height and width will depend on your W/D size. I hope that helps!
Delete